Contract 0xa5df6d8d59a7fbdb8a11e23fda9d11c4103dc49f

Txn Hash Method
Block
From
To
Value [Txn Fee]
0x11b8b45b5ebe943c8899491664d08c329babb2b3cb1c3a1d98054244afdcf991Set800951532022-12-07 6:16:0420 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003601152
0x0e69fe573005a546b66df29b7d20e91af90f3d1742885b7c640a4dbe4bc59a97Set800951462022-12-07 6:15:5620 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003601224
0x6477dd94ab132623f1bfba2353c3e887b8ceea18963fdd6cd09623450a94d80cSet800951402022-12-07 6:15:4920 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x303f4755d6d98cdb9066a683bba3114a576f1c56ef2f941626dc1bf2a8603f21Set800951342022-12-07 6:15:4121 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x266dfd54ed72ffeb495ec553096767f377eebebedec25417395a47d98c22a421Set800951272022-12-07 6:15:3321 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x9c96dfa5199367e925ae610df2ce9e1045144c00b8f9e97c20874c1423dc5a05Set800951212022-12-07 6:15:2521 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0xbd3a3b1a5e9e68f7248cb7673fc3d3a639a3b83c0822252af1472d6708d5c16fSet800951162022-12-07 6:15:1921 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x1aee82dca7e16e8c740d850ab91f0bd75f65e83ebc83b9b0878ad7d766af6b9dSet800951112022-12-07 6:15:1321 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x27edda612d09a5875cf78f52eb59bee8e8dc9524e000d4096554a12dab21d1fbSet800951062022-12-07 6:15:0821 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x479ffd08f631aecc4bb95e0e82ca6b1c3f332210f4fd953e1ed1180a2adc6833Set800950992022-12-07 6:14:5921 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634752
0x7b4593ba270458d9d786ce13b8c1dd7b2488dae7ad30675c6c1565c361a57ca9Set800950942022-12-07 6:14:5221 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634752
0x40e8c846b99887322fac13b42725d025ea04a5f5f65993bee970034b11455c9dSet800950882022-12-07 6:14:4622 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634752
0xde22b553ece8e722b597bb005d393fb8ea929d9a55a5de3271943b73afdc66d1Set800918212022-12-07 5:12:321 hr 24 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634752
0xe8ba493c34dccf831611f57b3a9df78eb4f29f9e5087b46bb3440fbeff7bac15Set800918152022-12-07 5:12:261 hr 24 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x6e14b2af3d5a7ac56dc4cf1018439a90d84b9f19afbdbacbaf0d53eac0ff8debSet800918092022-12-07 5:12:191 hr 24 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x877c181fc6b9532441bf33e1fc768999c0d8175b5a5df6e498adfc54480b4ae8Set800918032022-12-07 5:12:131 hr 24 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x344611329beef4a2cb1d0ead9e1ba55ac98df1c905fd9f4183c125c626714ed6Set800917982022-12-07 5:12:071 hr 24 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x05a2715858194251d1b30b4cfb34b707bdd04afde49b6aabcecc2f4a56b3c67dSet800917922022-12-07 5:12:011 hr 24 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x3ffdf01f0a994db29f9febfcbcc030e9d67e6aa94d0c31c7c7d13230431810e9Set800917852022-12-07 5:11:531 hr 24 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x03f78b0dae0a88cb11fb90168e7f57747452fb65959ba892db473f9bc8aac23aSet800917802022-12-07 5:11:471 hr 25 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x1fab02209cb7a9c4b7b5d01db627a1d7a1f1c373d6306b5a08267e8852ba0e12Set800917762022-12-07 5:11:431 hr 25 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634824
0x6dfed4c58bfb9bc93b51152cb25fc4b765a094e8499d28fbafc34e19695552caSet800917702022-12-07 5:11:361 hr 25 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634752
0x8c800166aa7b09c444f0ac4e6c7c92d06f8870a80a0669517ab42c4bc8f8cd8dSet800917652022-12-07 5:11:311 hr 25 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634752
0xd80fbe12127d3c7762843951f1602f67acc2420fbc97f06764df2d492b4a94d8Set800917602022-12-07 5:11:251 hr 25 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634752
0xf3deee7206698dbbbdba855cfa5c8d6d6b5fd72bc944a9ea1963a7bbc17c49a4Set800885372022-12-07 4:09:142 hrs 27 mins agoPolaris Finance: DEV Wallet IN  Polaris Finance: SPolar Reward Pool0 ETH0.00003634752
[ Download CSV Export 
Parent Txn Hash Block From To Value
Loading
This contract may be a proxy contract. Click on More Options and select Is this a proxy? to confirm and enable the "Read as Proxy" & "Write as Proxy" tabs.

Contract Source Code Verified (Exact Match)

Contract Name:
SpolarRewardPool

Compiler Version
v0.6.12+commit.27d51765

Optimization Enabled:
Yes with 200 runs

Other Settings:
default evmVersion, MIT license
File 1 of 5 : SpolarRewardPool.sol
// SPDX-License-Identifier: MIT

pragma solidity 0.6.12;

import "IERC20.sol";
import "SafeERC20.sol";
import "SafeMath.sol";

// Note that this pool has no minter key of spolar (rewards).
// Instead, the governance will call spolar distributeReward method and send reward to this pool at the beginning.
contract SpolarRewardPool {
    using SafeMath for uint256;
    using SafeERC20 for IERC20;

    // governance
    address public operator;

    // Info of each user.
    struct UserInfo {
        uint256 amount; // How many LP tokens the user has provided.
        uint256 rewardDebt; // Reward debt. See explanation below.
    }

    // Info of each pool.
    struct PoolInfo {
        IERC20 token; // Address of LP token contract.
        uint256 allocPoint; // How many allocation points assigned to this pool. spolars to distribute per block.
        uint256 lastRewardTime; // Last time that spolars distribution occurs.
        uint256 accSpolarPerShare; // Accumulated spolars per share, times 1e18. See below.
        bool isStarted; // if lastRewardTime has passed
    }

    IERC20 public spolar;

    // Info of each pool.
    PoolInfo[] public poolInfo;

    // Info of each user that stakes LP tokens.
    mapping(uint256 => mapping(address => UserInfo)) public userInfo;

    // Total allocation points. Must be the sum of all allocation points in all pools.
    uint256 public totalAllocPoint = 0;

    // The time when spolar mining starts.
    uint256 public poolStartTime;

    // The time when spolar mining ends.
    uint256 public poolEndTime;

    uint256 public spolarPerSecond = 0.0015817901e18; // 41000 spolar / (300 days * 24h * 60min * 60s)
    uint256 public runningTime = 300 days; // 300 days
    uint256 public constant TOTAL_REWARDS = 41000e18;

    event Deposit(address indexed user, uint256 indexed pid, uint256 amount);
    event Withdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event EmergencyWithdraw(address indexed user, uint256 indexed pid, uint256 amount);
    event RewardPaid(address indexed user, uint256 amount);

    constructor(
        address _spolar,
        uint256 _poolStartTime
    ) public {
        require(block.timestamp < _poolStartTime, "late");
        if (_spolar != address(0)) spolar = IERC20(_spolar);
        poolStartTime = _poolStartTime;
        poolEndTime = poolStartTime + runningTime;
        operator = msg.sender;
    }

    modifier onlyOperator() {
        require(operator == msg.sender, "SpolarRewardPool: caller is not the operator");
        _;
    }

    function checkPoolDuplicate(IERC20 _token) internal view {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            require(poolInfo[pid].token != _token, "SpolarRewardPool: existing pool?");
        }
    }

    // Add a new lp to the pool. Can only be called by the owner.
    function add(
        uint256 _allocPoint,
        IERC20 _token,
        bool _withUpdate,
        uint256 _lastRewardTime
    ) public onlyOperator {
        checkPoolDuplicate(_token);
        if (_withUpdate) {
            massUpdatePools();
        }
        if (block.timestamp < poolStartTime) {
            // chef is sleeping
            if (_lastRewardTime == 0) {
                _lastRewardTime = poolStartTime;
            } else {
                if (_lastRewardTime < poolStartTime) {
                    _lastRewardTime = poolStartTime;
                }
            }
        } else {
            // chef is cooking
            if (_lastRewardTime == 0 || _lastRewardTime < block.timestamp) {
                _lastRewardTime = block.timestamp;
            }
        }
        bool _isStarted =
        (_lastRewardTime <= poolStartTime) ||
        (_lastRewardTime <= block.timestamp);
        poolInfo.push(PoolInfo({
            token : _token,
            allocPoint : _allocPoint,
            lastRewardTime : _lastRewardTime,
            accSpolarPerShare : 0,
            isStarted : _isStarted
            }));
        if (_isStarted) {
            totalAllocPoint = totalAllocPoint.add(_allocPoint);
        }
    }

    // Update the given pool's spolar allocation point. Can only be called by the owner.
    function set(uint256 _pid, uint256 _allocPoint) public onlyOperator {
        massUpdatePools();
        PoolInfo storage pool = poolInfo[_pid];
        if (pool.isStarted) {
            totalAllocPoint = totalAllocPoint.sub(pool.allocPoint).add(
                _allocPoint
            );
        }
        pool.allocPoint = _allocPoint;
    }

    // Return accumulate rewards over the given _from to _to block.
    function getGeneratedReward(uint256 _fromTime, uint256 _toTime) public view returns (uint256) {
        if (_fromTime >= _toTime) return 0;
        if (_toTime >= poolEndTime) {
            if (_fromTime >= poolEndTime) return 0;
            if (_fromTime <= poolStartTime) return poolEndTime.sub(poolStartTime).mul(spolarPerSecond);
            return poolEndTime.sub(_fromTime).mul(spolarPerSecond);
        } else {
            if (_toTime <= poolStartTime) return 0;
            if (_fromTime <= poolStartTime) return _toTime.sub(poolStartTime).mul(spolarPerSecond);
            return _toTime.sub(_fromTime).mul(spolarPerSecond);
        }
    }

    // View function to see pending spolars on frontend.
    function pendingShare(uint256 _pid, address _user) external view returns (uint256) {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_user];
        uint256 accSpolarPerShare = pool.accSpolarPerShare;
        uint256 tokenSupply = pool.token.balanceOf(address(this));
        if (block.timestamp > pool.lastRewardTime && tokenSupply != 0) {
            uint256 _generatedReward = getGeneratedReward(pool.lastRewardTime, block.timestamp);
            uint256 _spolarReward = _generatedReward.mul(pool.allocPoint).div(totalAllocPoint);
            accSpolarPerShare = accSpolarPerShare.add(_spolarReward.mul(1e18).div(tokenSupply));
        }
        return user.amount.mul(accSpolarPerShare).div(1e18).sub(user.rewardDebt);
    }

    // Update reward variables for all pools. Be careful of gas spending!
    function massUpdatePools() public {
        uint256 length = poolInfo.length;
        for (uint256 pid = 0; pid < length; ++pid) {
            updatePool(pid);
        }
    }

    // Update reward variables of the given pool to be up-to-date.
    function updatePool(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        if (block.timestamp <= pool.lastRewardTime) {
            return;
        }
        uint256 tokenSupply = pool.token.balanceOf(address(this));
        if (tokenSupply == 0) {
            pool.lastRewardTime = block.timestamp;
            return;
        }
        if (!pool.isStarted) {
            pool.isStarted = true;
            totalAllocPoint = totalAllocPoint.add(pool.allocPoint);
        }
        if (totalAllocPoint > 0) {
            uint256 _generatedReward = getGeneratedReward(pool.lastRewardTime, block.timestamp);
            uint256 _spolarReward = _generatedReward.mul(pool.allocPoint).div(totalAllocPoint);
            pool.accSpolarPerShare = pool.accSpolarPerShare.add(_spolarReward.mul(1e18).div(tokenSupply));
        }
        pool.lastRewardTime = block.timestamp;
    }

    // Deposit LP tokens.
    function deposit(uint256 _pid, uint256 _amount) public {
        address _sender = msg.sender;
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_sender];
        updatePool(_pid);
        if (user.amount > 0) {
            uint256 _pending = user.amount.mul(pool.accSpolarPerShare).div(1e18).sub(user.rewardDebt);
            if (_pending > 0) {
                safeSpolarTransfer(_sender, _pending);
                emit RewardPaid(_sender, _pending);
            }
        }
        if (_amount > 0) {
            pool.token.safeTransferFrom(_sender, address(this), _amount);
            user.amount = user.amount.add(_amount);
        }
        user.rewardDebt = user.amount.mul(pool.accSpolarPerShare).div(1e18);
        emit Deposit(_sender, _pid, _amount);
    }

    // Withdraw LP tokens.
    function withdraw(uint256 _pid, uint256 _amount) public {
        address _sender = msg.sender;
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][_sender];
        require(user.amount >= _amount, "withdraw: not good");
        updatePool(_pid);
        uint256 _pending = user.amount.mul(pool.accSpolarPerShare).div(1e18).sub(user.rewardDebt);
        if (_pending > 0) {
            safeSpolarTransfer(_sender, _pending);
            emit RewardPaid(_sender, _pending);
        }
        if (_amount > 0) {
            user.amount = user.amount.sub(_amount);
            pool.token.safeTransfer(_sender, _amount);
        }
        user.rewardDebt = user.amount.mul(pool.accSpolarPerShare).div(1e18);
        emit Withdraw(_sender, _pid, _amount);
    }

    // Withdraw without caring about rewards. EMERGENCY ONLY.
    function emergencyWithdraw(uint256 _pid) public {
        PoolInfo storage pool = poolInfo[_pid];
        UserInfo storage user = userInfo[_pid][msg.sender];
        uint256 _amount = user.amount;
        user.amount = 0;
        user.rewardDebt = 0;
        pool.token.safeTransfer(msg.sender, _amount);
        emit EmergencyWithdraw(msg.sender, _pid, _amount);
    }

    // Safe spolar transfer function, just in case if rounding error causes pool to not have enough spolars.
    function safeSpolarTransfer(address _to, uint256 _amount) internal {
        uint256 _spolarBal = spolar.balanceOf(address(this));
        if (_spolarBal > 0) {
            if (_amount > _spolarBal) {
                spolar.safeTransfer(_to, _spolarBal);
            } else {
                spolar.safeTransfer(_to, _amount);
            }
        }
    }

    function setOperator(address _operator) external onlyOperator {
        operator = _operator;
    }

    function governanceRecoverUnsupported(IERC20 _token, uint256 amount, address to) external onlyOperator {
        if (block.timestamp < poolEndTime + 90 days) {
            // do not allow to drain core token (spolar or lps) if less than 90 days after pool ends
            require(_token != spolar, "spolar");
            uint256 length = poolInfo.length;
            for (uint256 pid = 0; pid < length; ++pid) {
                PoolInfo storage pool = poolInfo[pid];
                require(_token != pool.token, "pool.token");
            }
        }
        _token.safeTransfer(to, amount);
    }
}

File 2 of 5 : IERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address sender, address recipient, uint256 amount) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);
}

File 3 of 5 : SafeERC20.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

import "IERC20.sol";
import "SafeMath.sol";
import "Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using SafeMath for uint256;
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        // solhint-disable-next-line max-line-length
        require((value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).add(value);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 newAllowance = token.allowance(address(this), spender).sub(value, "SafeERC20: decreased allowance below zero");
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, newAllowance));
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        if (returndata.length > 0) { // Return data is optional
            // solhint-disable-next-line max-line-length
            require(abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
        }
    }
}

File 4 of 5 : SafeMath.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.0 <0.8.0;

/**
 * @dev Wrappers over Solidity's arithmetic operations with added overflow
 * checks.
 *
 * Arithmetic operations in Solidity wrap on overflow. This can easily result
 * in bugs, because programmers usually assume that an overflow raises an
 * error, which is the standard behavior in high level programming languages.
 * `SafeMath` restores this intuition by reverting the transaction when an
 * operation overflows.
 *
 * Using this library instead of the unchecked operations eliminates an entire
 * class of bugs, so it's recommended to use it always.
 */
library SafeMath {
    /**
     * @dev Returns the addition of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryAdd(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        uint256 c = a + b;
        if (c < a) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the substraction of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function trySub(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b > a) return (false, 0);
        return (true, a - b);
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, with an overflow flag.
     *
     * _Available since v3.4._
     */
    function tryMul(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        // Gas optimization: this is cheaper than requiring 'a' not being zero, but the
        // benefit is lost if 'b' is also tested.
        // See: https://github.com/OpenZeppelin/openzeppelin-contracts/pull/522
        if (a == 0) return (true, 0);
        uint256 c = a * b;
        if (c / a != b) return (false, 0);
        return (true, c);
    }

    /**
     * @dev Returns the division of two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryDiv(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a / b);
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers, with a division by zero flag.
     *
     * _Available since v3.4._
     */
    function tryMod(uint256 a, uint256 b) internal pure returns (bool, uint256) {
        if (b == 0) return (false, 0);
        return (true, a % b);
    }

    /**
     * @dev Returns the addition of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `+` operator.
     *
     * Requirements:
     *
     * - Addition cannot overflow.
     */
    function add(uint256 a, uint256 b) internal pure returns (uint256) {
        uint256 c = a + b;
        require(c >= a, "SafeMath: addition overflow");
        return c;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting on
     * overflow (when the result is negative).
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b <= a, "SafeMath: subtraction overflow");
        return a - b;
    }

    /**
     * @dev Returns the multiplication of two unsigned integers, reverting on
     * overflow.
     *
     * Counterpart to Solidity's `*` operator.
     *
     * Requirements:
     *
     * - Multiplication cannot overflow.
     */
    function mul(uint256 a, uint256 b) internal pure returns (uint256) {
        if (a == 0) return 0;
        uint256 c = a * b;
        require(c / a == b, "SafeMath: multiplication overflow");
        return c;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting on
     * division by zero. The result is rounded towards zero.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: division by zero");
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting when dividing by zero.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b) internal pure returns (uint256) {
        require(b > 0, "SafeMath: modulo by zero");
        return a % b;
    }

    /**
     * @dev Returns the subtraction of two unsigned integers, reverting with custom message on
     * overflow (when the result is negative).
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {trySub}.
     *
     * Counterpart to Solidity's `-` operator.
     *
     * Requirements:
     *
     * - Subtraction cannot overflow.
     */
    function sub(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b <= a, errorMessage);
        return a - b;
    }

    /**
     * @dev Returns the integer division of two unsigned integers, reverting with custom message on
     * division by zero. The result is rounded towards zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryDiv}.
     *
     * Counterpart to Solidity's `/` operator. Note: this function uses a
     * `revert` opcode (which leaves remaining gas untouched) while Solidity
     * uses an invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function div(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a / b;
    }

    /**
     * @dev Returns the remainder of dividing two unsigned integers. (unsigned integer modulo),
     * reverting with custom message when dividing by zero.
     *
     * CAUTION: This function is deprecated because it requires allocating memory for the error
     * message unnecessarily. For custom revert reasons use {tryMod}.
     *
     * Counterpart to Solidity's `%` operator. This function uses a `revert`
     * opcode (which leaves remaining gas untouched) while Solidity uses an
     * invalid opcode to revert (consuming all remaining gas).
     *
     * Requirements:
     *
     * - The divisor cannot be zero.
     */
    function mod(uint256 a, uint256 b, string memory errorMessage) internal pure returns (uint256) {
        require(b > 0, errorMessage);
        return a % b;
    }
}

File 5 of 5 : Address.sol
// SPDX-License-Identifier: MIT

pragma solidity >=0.6.2 <0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        // solhint-disable-next-line no-inline-assembly
        assembly { size := extcodesize(account) }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        // solhint-disable-next-line avoid-low-level-calls, avoid-call-value
        (bool success, ) = recipient.call{ value: amount }("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain`call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
      return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value, string memory errorMessage) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        require(isContract(target), "Address: call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.call{ value: value }(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data, string memory errorMessage) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.staticcall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data, string memory errorMessage) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        // solhint-disable-next-line avoid-low-level-calls
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return _verifyCallResult(success, returndata, errorMessage);
    }

    function _verifyCallResult(bool success, bytes memory returndata, string memory errorMessage) private pure returns(bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                // solhint-disable-next-line no-inline-assembly
                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

Settings
{
  "evmVersion": "istanbul",
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "libraries": {
    "SpolarRewardPool.sol": {}
  },
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "abi"
      ]
    }
  }
}

Contract ABI

[{"inputs":[{"internalType":"address","name":"_spolar","type":"address"},{"internalType":"uint256","name":"_poolStartTime","type":"uint256"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Deposit","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"EmergencyWithdraw","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"RewardPaid","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"user","type":"address"},{"indexed":true,"internalType":"uint256","name":"pid","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amount","type":"uint256"}],"name":"Withdraw","type":"event"},{"inputs":[],"name":"TOTAL_REWARDS","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_allocPoint","type":"uint256"},{"internalType":"contract IERC20","name":"_token","type":"address"},{"internalType":"bool","name":"_withUpdate","type":"bool"},{"internalType":"uint256","name":"_lastRewardTime","type":"uint256"}],"name":"add","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"deposit","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"emergencyWithdraw","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"_fromTime","type":"uint256"},{"internalType":"uint256","name":"_toTime","type":"uint256"}],"name":"getGeneratedReward","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"_token","type":"address"},{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"address","name":"to","type":"address"}],"name":"governanceRecoverUnsupported","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"massUpdatePools","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"operator","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"address","name":"_user","type":"address"}],"name":"pendingShare","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolEndTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"}],"name":"poolInfo","outputs":[{"internalType":"contract IERC20","name":"token","type":"address"},{"internalType":"uint256","name":"allocPoint","type":"uint256"},{"internalType":"uint256","name":"lastRewardTime","type":"uint256"},{"internalType":"uint256","name":"accSpolarPerShare","type":"uint256"},{"internalType":"bool","name":"isStarted","type":"bool"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"poolStartTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"runningTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_allocPoint","type":"uint256"}],"name":"set","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"address","name":"_operator","type":"address"}],"name":"setOperator","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"spolar","outputs":[{"internalType":"contract IERC20","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"spolarPerSecond","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"totalAllocPoint","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"}],"name":"updatePool","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"uint256","name":"","type":"uint256"},{"internalType":"address","name":"","type":"address"}],"name":"userInfo","outputs":[{"internalType":"uint256","name":"amount","type":"uint256"},{"internalType":"uint256","name":"rewardDebt","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"uint256","name":"_pid","type":"uint256"},{"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"withdraw","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

Constructor Arguments (ABI-Encoded and is the last bytes of the Contract Creation Code above)

0000000000000000000000009d6fc90b25976e40adad5a3edd08af9ed7a2172900000000000000000000000000000000000000000000000000000000620fa660

-----Decoded View---------------
Arg [0] : _spolar (address): 0x9d6fc90b25976e40adad5a3edd08af9ed7a21729
Arg [1] : _poolStartTime (uint256): 1645192800

-----Encoded View---------------
2 Constructor Arguments found :
Arg [0] : 0000000000000000000000009d6fc90b25976e40adad5a3edd08af9ed7a21729
Arg [1] : 00000000000000000000000000000000000000000000000000000000620fa660


Block Transaction Gas Used Reward
Age Block Fee Address BC Fee Address Voting Power Jailed Incoming
Block Uncle Number Difficulty Gas Used Reward
Loading
Make sure to use the "Vote Down" button for any spammy posts, and the "Vote Up" for interesting conversations.